Настройка Roverbook Neo U800


Автор темы
sorry_one
Сообщения: 4
Зарегистрирован: 16 фев 2015, 20:26

Настройка Roverbook Neo U800

#1

Сообщение sorry_one » 17 фев 2015, 21:22

Здравствия всем!
Есть у меня такой двайс под названием Roverbook Neo U800, на чипсете AMD geode, ввиду отсутствия запчастей в него была установленна CF карта памяти, объёмом 4Gb посредством переходника CF/IDE.
Не помню что меня заставило выбрать именно Lubuntu 10.04 LTS, по моему поддержка geode чипсета и сравнительно малый объем установленной системы. При помощи Unetbootin закачал на флешку и установил, всё прошло без проблем, но радость была недолгой ))) Требуется допилить "напильником". )))


Сам больше чем на пользователя не тяну, но уже имел дело с linuxами разными, базовые представления имются, но, видимо, недостаточные.

Пер вое с чем столкнулся - разрешение экрана - экран поддерживает 1024*600, а показывал максимум 800*600, при этом нижнюю часть экрана не видно и панель запуска находится за пределами экрана, перенастроил ее на верхнюю часть экрана, жить можно стало. Долго курил маны, скачал и поставил xorg-video-geode ( или xserver-xorg-video-geode или и то и другое), не заработало. Недавно нашел в интернете готовый конфиг на geode видюху, бросил его в /etc/X11/xorg.conf и у меня заработало разрешение 1024*768, но экран так же "обрезан". В списке режимов появилось так же 1024*600, попробовал установить его, но изображение как-то несуразно вытягивается и нижнюю часть рабочего стола так же не видно. Что-то делаю не так(((

 xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

#Section "ServerFlags"
# Option "AutoAddDevices" "False"
#EndSection

Section "Module"
Load "dbe"
Load "dri2"
Load "record"
Load "dri"
Load "glx"
Load "extmod"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "AutoRepeat"
Option "XkbDisable"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us,ru'
Option "XkbVariant" ",winkeys"
Option "XkbOptions" "grp:lwin_toggle,grp_led:scroll"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Option "DPMS"
HorizSync 28-50
VertRefresh 43-73
Modeline "1024x600" 50.0 1024 1104 1176 1248 600 603 619 630
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
Identifier "Card0"
Driver "geode"
VendorName "Advanced Micro Devices [AMD]"
BoardName "Geode LX Video"
BusID "PCI:0:1:1"
Option "PanelGeometry" "1024x600"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Depth 24
Modes "1024x600"
EndSubSection
EndSection


Второе - это постоянные ошибки и запуск fsck при загрузке. Сдаётся мне, что это из-за неправильного отмонтирования разделов, постоянно ругается на tmpfs. Подскажите плиз куда копать?

 fdisk -l
Диск /dev/sda: 4034 МБ, 4034838528 байт
255 heads, 63 sectors/track, 490 cylinders
Units = цилиндры of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000dc2d7

Устр-во Загр Начало Конец Блоки Id Система
/dev/sda1 * 1 462 3708928 83 Linux
Раздел 1 не заканчивается на границе цилиндра.
/dev/sda2 462 491 228353 5 Расширенный
Раздел 2 не заканчивается на границе цилиндра.
/dev/sda5 462 491 228352 82 Linux своп / Solaris

 mount
/dev/sda1 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /dev type devtmpfs (rw,mode=0755)
none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
none on /dev/shm type tmpfs (rw,nosuid,nodev)
none on /var/run type tmpfs (rw,nosuid,mode=0755)
none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)
none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)


 /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda1 during installation
UUID=9ef3bf67-7a66-4ef3-8810-db8a14e3f314 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=a6a9c132-23b5-4c89-863b-934268222665 none swap sw 0 0


Третьей проблемой является Wi-Fi свисток TP-Link TL-WN821N (как я понял v.3), lsusb определяет его как 0cf3:7015 Atheros Communication, долго гуглил и не понял, будет ли он вообще работать с моей версией ядра. Скачал и установил ath9k_htc-installer, но он, после долгой сборки драйвера, так и не установил его, в /lib/modules не появляется драйвер, хотя firmware есть (не помню сам я его качал или это инсталлер туда его кинул). Установка через Ndiswrapper не подходит, т.к. хочу иметь monitor mode на адаптере. Встроенный вайфай ZyDas WLA-54L работает, но плохо ловит, брал D-Link wifi свисток у товарища, определяется как RT чип и отлично работает.
 логи установки ath9k_htc-installer
1.log
Processing new driver-select request...
Backing up makefile: Makefile.bk
Backup exists: Makefile.bk
Backup exists: Makefile.bk
Backup exists: Makefile.bk
Backup exists: Makefile.bk
Backing up makefile: drivers/net/wireless/Makefile.bk
Backing up makefile: drivers/net/wireless/ath/Makefile.bk
Backing up makefile: net/wireless/Makefile.bk
Backing up makefile: drivers/ssb/Makefile.bk
Backing up makefile: drivers/bcma/Makefile.bk
Backing up makefile: drivers/misc/eeprom/Makefile.bk
Backup exists: Makefile.bk

2.log

./scripts/gen-compat-autoconf.sh config.mk > include/linux/compat_autoconf.h
make -C /lib/modules/2.6.32-72-generic/build M=/home/sorry/ath9k_htc/compat-wireless modules
make[1]: Вход в каталог `/usr/src/linux-headers-2.6.32-72-generic'
LD /home/sorry/ath9k_htc/compat-wireless/compat/built-in.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/compat/main.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/compat/compat-2.6.33.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/compat/compat-2.6.35.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/compat/compat-2.6.36.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/compat/kfifo.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/compat/compat-2.6.37.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/compat/compat-2.6.38.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/compat/compat-2.6.39.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/compat/kstrtox.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/compat/compat-3.0.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/compat/cordic.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/compat/crc8.o
LD [M] /home/sorry/ath9k_htc/compat-wireless/compat/compat.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/compat/compat_firmware_class.o
LD /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/built-in.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/main.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/regd.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/hw.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/key.o
LD [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath.o
LD /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/built-in.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/beacon.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/gpio.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/init.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/main.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/recv.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/xmit.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/mci.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/rc.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/pci.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/common.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/htc_hst.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/hif_usb.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/wmi.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/htc_drv_txrx.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/htc_drv_main.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/htc_drv_beacon.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/htc_drv_init.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/htc_drv_gpio.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/ar9002_hw.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/ar9003_hw.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/hw.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/ar9003_phy.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/ar9002_phy.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/ar5008_phy.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/ar9002_calib.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/ar9003_calib.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/ar9003_rtt.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/calib.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/eeprom.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/eeprom_def.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/eeprom_4k.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/eeprom_9287.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/ani.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/btcoex.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/mac.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/ar9002_mac.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/ar9003_mac.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/ar9003_eeprom.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/ar9003_paprd.o
LD [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/ath9k.o
LD [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/ath9k_hw.o
LD [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/ath9k_common.o
LD [M] /home/sorry/ath9k_htc/compat-wireless/drivers/net/wireless/ath/ath9k/ath9k_htc.o
LD /home/sorry/ath9k_htc/compat-wireless/net/mac80211/built-in.o
CC [M] /home/sorry/ath9k_htc/compat-wireless/net/mac80211/main.o
make[1]: Выход из каталога `/usr/src/linux-headers-2.6.32-72-generic'

3.log

Your old wireless subsystem modules were left intact:

kernel/net/mac80211/mac80211.ko
kernel/net/wireless/cfg80211.ko
kernel/net/wireless/lib80211.ko
kernel/drivers/net/wireless/adm8211.ko
kernel/drivers/net/wireless/ath/ar9170/ar9170usb.ko
kernel/drivers/net/wireless/at76c50x-usb.ko
kernel/drivers/net/wireless/ath/ath.ko
kernel/drivers/net/wireless/ath/ath5k/ath5k.ko
kernel/drivers/net/wireless/ath/ath9k/ath9k.ko
kernel/drivers/net/wireless/b43/b43.ko
kernel/drivers/net/wireless/b43legacy/b43legacy.ko
kernel/drivers/net/b44.ko
kernel/drivers/net/usb/cdc_ether.ko
kernel/drivers/misc/eeprom/eeprom_93cx6.ko
kernel/drivers/net/wireless/ipw2x00/ipw2100.ko
kernel/drivers/net/wireless/ipw2x00/ipw2200.ko
kernel/drivers/net/wireless/iwlwifi/iwl3945.ko
kernel/drivers/net/wireless/iwlwifi/iwlagn.ko
kernel/drivers/net/wireless/iwlwifi/iwlcore.ko
kernel/drivers/net/wireless/iwmc3200wifi/iwmc3200wifi.ko
kernel/net/wireless/lib80211_crypt_ccmp.ko
kernel/net/wireless/lib80211_crypt_tkip.ko
kernel/net/wireless/lib80211_crypt_wep.ko
kernel/drivers/net/wireless/libertas/libertas.ko
kernel/drivers/net/wireless/libertas/libertas_cs.ko
kernel/drivers/net/wireless/libertas/libertas_sdio.ko
kernel/drivers/net/wireless/libertas/libertas_spi.ko
kernel/drivers/net/wireless/libertas_tf/libertas_tf.ko
kernel/drivers/net/wireless/libertas_tf/libertas_tf_usb.ko
kernel/drivers/net/wireless/ipw2x00/libipw.ko
kernel/drivers/net/wireless/mac80211_hwsim.ko
kernel/drivers/net/wireless/mwl8k.ko
kernel/drivers/net/wireless/orinoco/orinoco_cs.ko
kernel/drivers/net/wireless/orinoco/orinoco_nortel.ko
kernel/drivers/net/wireless/orinoco/orinoco_pci.ko
kernel/drivers/net/wireless/orinoco/orinoco_plx.ko
kernel/drivers/net/wireless/orinoco/orinoco.ko
kernel/drivers/net/wireless/p54/p54common.ko
kernel/drivers/net/wireless/p54/p54pci.ko
kernel/drivers/net/wireless/p54/p54spi.ko
kernel/drivers/net/wireless/p54/p54usb.ko
kernel/drivers/net/usb/rndis_host.ko
kernel/drivers/net/wireless/rndis_wlan.ko
kernel/drivers/net/wireless/rt2x00/rt2400pci.ko
kernel/drivers/net/wireless/rt2x00/rt2500pci.ko
kernel/drivers/net/wireless/rt2x00/rt2500usb.ko
kernel/drivers/net/wireless/rt2x00/rt2800usb.ko
kernel/drivers/net/wireless/rt2x00/rt2x00lib.ko
kernel/drivers/net/wireless/rt2x00/rt2x00pci.ko
kernel/drivers/net/wireless/rt2x00/rt2x00usb.ko
kernel/drivers/net/wireless/rt2x00/rt61pci.ko
kernel/drivers/net/wireless/rt2x00/rt73usb.ko
kernel/drivers/net/wireless/rtl818x/rtl8180.ko
kernel/drivers/net/wireless/rtl818x/rtl8187.ko
kernel/drivers/net/wireless/orinoco/spectrum_cs.ko
kernel/drivers/ssb/ssb.ko
kernel/drivers/net/wireless/libertas/usb8xxx.ko
kernel/drivers/net/usb/usbnet.ko
kernel/drivers/net/wireless/wl12xx/wl1251.ko
kernel/drivers/net/wireless/zd1211rw/zd1211rw.ko

Your old ethernet subsystem modules are left intact:

kernel/drivers/net/atlx/atl1.ko
kernel/drivers/net/atlx/atl2.ko
kernel/drivers/net/atl1e/atl1e.ko
kernel/drivers/net/atl1c/atl1c.ko

Your old bluetooth subsystem modules were left intact:

kernel/drivers/bluetooth/bcm203x.ko
kernel/drivers/bluetooth/bluecard_cs.ko
kernel/net/bluetooth/bluetooth.ko
kernel/net/bluetooth/bnep/bnep.ko
kernel/drivers/bluetooth/bpa10x.ko
kernel/drivers/bluetooth/bt3c_cs.ko
kernel/drivers/bluetooth/btmrvl.ko
kernel/drivers/bluetooth/btmrvl_sdio.ko
kernel/drivers/bluetooth/btsdio.ko
kernel/drivers/bluetooth/btusb.ko
kernel/drivers/bluetooth/btuart_cs.ko
kernel/net/bluetooth/cmtp/cmtp.ko
kernel/drivers/bluetooth/dtl1_cs.ko
kernel/net/bluetooth/hidp/hidp.ko
kernel/drivers/bluetooth/hci_vhci.ko
kernel/drivers/bluetooth/hci_uart.ko
kernel/net/bluetooth/l2cap.ko
kernel/net/bluetooth/rfcomm/rfcomm.ko
kernel/net/bluetooth/sco.ko

make -C /lib/modules/2.6.32-72-generic/build M=/home/sorry/ath9k_htc/compat-wireless modules
make[1]: Вход в каталог `/usr/src/linux-headers-2.6.32-72-generic'
CC [M] /home/sorry/ath9k_htc/compat-wireless/net/mac80211/main.o
make[1]: Выход из каталога `/usr/src/linux-headers-2.6.32-72-generic


Помогите пожалуйста, люди добрые. )

Заранее спасибо!


Автор темы
sorry_one
Сообщения: 4
Зарегистрирован: 16 фев 2015, 20:26

Re: Настройка Roverbook Neo U800

#2

Сообщение sorry_one » 17 фев 2015, 21:24

На всякий случай еще вот:
 dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-72-generic (buildd@roseapple) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #139-Ubuntu SMP Wed Jan 14 21:19:14 UTC 2015 (Ubuntu 2.6.32-72.139-generic 2.6.32.63+drm33.26)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001e7b0000 (usable)
[ 0.000000] BIOS-e820: 000000001e7b0000 - 000000001e7bffc0 (ACPI data)
[ 0.000000] BIOS-e820: 000000001e7bffc0 - 000000001e7c0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000080400000 - 0000000080440004 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 0000000100000000 (reserved)
[ 0.000000] DMI not present or invalid.
[ 0.000000] last_pfn = 0x1e7b0 max_arch_pfn = 0x100000
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000001e7b0000 (usable)
[ 0.000000] modified: 000000001e7b0000 - 000000001e7bffc0 (ACPI data)
[ 0.000000] modified: 000000001e7bffc0 - 000000001e7c0000 (ACPI NVS)
[ 0.000000] modified: 0000000080400000 - 0000000080440004 (reserved)
[ 0.000000] modified: 00000000f0000000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-000000001e7b0000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001e400000 page 2M
[ 0.000000] 001e400000 - 001e7b0000 page 4k
[ 0.000000] kernel direct mapping tables up to 1e7b0000 @ 7000-c000
[ 0.000000] RAMDISK: 16125000 - 16e03694
[ 0.000000] ACPI: RSDP 000e9010 00014 (v00 OID_00)
[ 0.000000] ACPI: RSDT 1e7b2320 00030 (v01 AMD RSDT_000 31303030 AMD 31303030)
[ 0.000000] ACPI: FACP 1e7b2220 00084 (v01 AMD FACP_000 31303030 AMD 31303030)
[ 0.000000] ACPI Warning: Invalid length for Pm2ControlBlock: 16, using default 8 (20090903/tbfadt-607)
[ 0.000000] ACPI: DSDT 1e7b0000 0221B (v01 INSYDE CS553x 00001007 INTL 20030122)
[ 0.000000] ACPI: FACS 1e7bffc0 00040
[ 0.000000] ACPI: BOOT 1e7b22b0 00028 (v01 AMD BOOT_000 31303030 AMD 31303030)
[ 0.000000] ACPI: DBGP 1e7b22e0 00034 (v01 AMD DBGP_000 31303030 AMD 31303030)
[ 0.000000] ACPI: no DMI BIOS year, acpi=force is required to enable ACPI
[ 0.000000] ACPI: Disabling ACPI support
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 487MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1e7b0000
[ 0.000000] low ram: 0 - 1e7b0000
[ 0.000000] node 0 low ram: 00000000 - 1e7b0000
[ 0.000000] node 0 bootmap 00008000 - 0000bcf8
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001e7b0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008e7ef8] TEXT DATA BSS ==> [0000100000 - 00008e7ef8]
[ 0.000000] #4 [0016125000 - 0016e03694] RAMDISK ==> [0016125000 - 0016e03694]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [00008e8000 - 00008eb000] BRK ==> [00008e8000 - 00008eb000]
[ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #8 [0000008000 - 000000c000] BOOTMAP ==> [0000008000 - 000000c000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001e7b0
[ 0.000000] HighMem 0x0001e7b0 -> 0x0001e7b0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001e7b0
[ 0.000000] On node 0 totalpages: 124747
[ 0.000000] free_area_init_node: node 0, pgdat c07a2800, node_mem_map c1001000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 944 pages used for memmap
[ 0.000000] Normal zone: 119808 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80440004 (gap: 80440004:6fbbfffc)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1400000 s36056 r0 d21288 u4194304
[ 0.000000] pcpu-alloc: s36056 r0 d21288 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 123771
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-72-generic root=UUID=9ef3bf67-7a66-4ef3-8810-db8a14e3f314 ro quiet splash
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2496960 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 470560k/499392k available (4707k kernel code, 28132k reserved, 2128k data, 664k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xdefb0000 - 0xff7fe000 ( 520 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xde7b0000 ( 487 MB)
[ 0.000000] .init : 0xc07ad000 - 0xc0853000 ( 664 kB)
[ 0.000000] .data : 0xc0598cb7 - 0xc07acdc8 (2128 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0598cb7 (4707 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:256
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 498.061 MHz processor.
[ 0.008012] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.12 BogoMIPS (lpj=1992244)
[ 0.008107] Security Framework initialized
[ 0.008242] AppArmor: AppArmor initialized
[ 0.008285] Mount-cache hash table entries: 512
[ 0.008812] Initializing cgroup subsys ns
[ 0.008834] Initializing cgroup subsys cpuacct
[ 0.008865] Initializing cgroup subsys memory
[ 0.008908] Initializing cgroup subsys devices
[ 0.008927] Initializing cgroup subsys freezer
[ 0.008945] Initializing cgroup subsys net_cls
[ 0.009028] CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
[ 0.009050] CPU: L2 Cache: 128K (32 bytes/line)
[ 0.009089] Performance Events: no PMU driver, software events only.
[ 0.009118] Checking 'hlt' instruction... OK.
[ 0.024262] SMP alternatives: switching to UP code
[ 0.049247] Freeing SMP alternatives: 19k freed
[ 0.049296] ftrace: converting mcount calls to 66 66 66 66 90
[ 0.049322] ftrace: allocating 21854 entries in 43 pages
[ 0.052241] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.052261] weird, boot CPU (#0) not listed by the BIOS.
[ 0.052276] SMP motherboard not detected.
[ 0.052292] Local APIC not detected. Using dummy APIC emulation.
[ 0.052307] SMP disabled
[ 0.052754] Brought up 1 CPUs
[ 0.052771] Total of 1 processors activated (996.12 BogoMIPS).
[ 0.052819] CPU0 attaching NULL sched-domain.
[ 0.053311] devtmpfs: initialized
[ 0.056206] regulator: core version 0.5
[ 0.056274] Time: 16:16:14 Date: 02/17/15
[ 0.056537] NET: Registered protocol family 16
[ 0.056626] swapper:1 freeing invalid memtype fffff000-0
[ 0.057243] EISA bus registered
[ 0.059240] PCI: PCI BIOS revision 2.10 entry at 0xff8b7, last bus=0
[ 0.059258] PCI: Using configuration type 1 for base access
[ 0.065474] bio: create slab <bio-0> at 0
[ 0.065747] ACPI: Interpreter disabled.
[ 0.066033] vgaarb: loaded
[ 0.066672] SCSI subsystem initialized
[ 0.066895] libata version 3.00 loaded.
[ 0.067287] usbcore: registered new interface driver usbfs
[ 0.067364] usbcore: registered new interface driver hub
[ 0.067509] usbcore: registered new device driver usb
[ 0.068161] PCI: Probing PCI hardware
[ 0.068178] PCI: Probing PCI hardware (bus 00)
[ 0.068559] pci 0000:00:01.0: reg 10 io port: [0xac1c-0xac1f]
[ 0.069679] pci 0000:00:01.1: reg 10 32bit mmio: [0x90000000-0x91ffffff]
[ 0.069812] pci 0000:00:01.1: reg 14 32bit mmio: [0x8fffc000-0x8fffffff]
[ 0.069943] pci 0000:00:01.1: reg 18 32bit mmio: [0x8fff8000-0x8fffbfff]
[ 0.070074] pci 0000:00:01.1: reg 1c 32bit mmio: [0x8fff4000-0x8fff7fff]
[ 0.070204] pci 0000:00:01.1: reg 20 32bit mmio: [0x8fff0000-0x8fff3fff]
[ 0.070946] pci 0000:00:01.2: reg 10 32bit mmio: [0xefe00000-0xefe03fff]
[ 0.071900] pci 0000:00:0d.0: reg 10 io port: [0xdf00-0xdfff]
[ 0.071929] pci 0000:00:0d.0: reg 14 32bit mmio: [0xefd00000-0xefd000ff]
[ 0.072050] pci 0000:00:0d.0: supports D1 D2
[ 0.072069] pci 0000:00:0d.0: PME# supported from D1 D2 D3hot D3cold
[ 0.072092] pci 0000:00:0d.0: PME# disabled
[ 0.072421] pci 0000:00:0f.0: reg 10 io port: [0x6000-0x6007]
[ 0.072540] pci 0000:00:0f.0: reg 14 io port: [0x6100-0x61ff]
[ 0.072660] pci 0000:00:0f.0: reg 18 io port: [0x6200-0x623f]
[ 0.072782] pci 0000:00:0f.0: reg 1c io port: [0x00-0x1f]
[ 0.072903] pci 0000:00:0f.0: reg 20 io port: [0x9d00-0x9d7f]
[ 0.073029] pci 0000:00:0f.0: reg 24 io port: [0x9c00-0x9c3f]
[ 0.074035] pci 0000:00:0f.2: reg 20 io port: [0xeff0-0xefff]
[ 0.074766] pci 0000:00:0f.3: reg 10 io port: [0xde80-0xdeff]
[ 0.076087] pci 0000:00:0f.4: reg 10 32bit mmio: [0xeff00000-0xeff00fff]
[ 0.077181] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
[ 0.077251] pci 0000:00:0f.4: PME# disabled
[ 0.077876] pci 0000:00:0f.5: reg 10 32bit mmio: [0xefc00000-0xefc00fff]
[ 0.078971] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
[ 0.079040] pci 0000:00:0f.5: PME# disabled
[ 0.079489] vgaarb: device added: PCI:0000:00:01.1,decodes=io+mem,owns=io+mem,locks=none
[ 0.080920] pci 0000:00:0f.0: default IRQ router [1022:2090]
[ 0.082086] NetLabel: Initializing
[ 0.082100] NetLabel: domain hash size = 128
[ 0.082114] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.082183] NetLabel: unlabeled traffic allowed by default
[ 0.082399] Switching to clocksource tsc
[ 0.090120] AppArmor: AppArmor Filesystem Enabled
[ 0.090143] pnp: PnP ACPI: disabled
[ 0.090158] PnPBIOS: Scanning system for PnP BIOS support...
[ 0.090574] PnPBIOS: PnP BIOS support was not detected.
[ 0.091675] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.091698] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.091908] NET: Registered protocol family 2
[ 0.092536] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.094598] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.094996] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.095411] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.095429] TCP reno registered
[ 0.095819] NET: Registered protocol family 1
[ 0.095952] pci 0000:00:01.1: Boot video device
[ 0.096166] pci 0000:00:0f.4: guessed PCI INT D -> IRQ 10
[ 0.096411] pci 0000:00:0f.4: sharing IRQ 10 with 0000:00:0f.5
[ 0.109658] pci 0000:00:0f.5: guessed PCI INT D -> IRQ 10
[ 0.109873] pci 0000:00:0f.5: sharing IRQ 10 with 0000:00:0f.4
[ 0.110282] Simple Boot Flag at 0x3f set to 0x1
[ 0.110436] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.110689] cpufreq-nforce2: No nForce2 chipset.
[ 0.110796] Scanning for low memory corruption every 60 seconds
[ 0.111476] audit: initializing netlink socket (disabled)
[ 0.111532] type=2000 audit(1424189774.109:1): initialized
[ 0.176858] Trying to unpack rootfs image as initramfs...
[ 0.246885] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.270335] VFS: Disk quotas dquot_6.5.2
[ 0.270814] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.280518] fuse init (API version 7.13)
[ 0.281131] msgmni has been set to 919
[ 0.287694] alg: No test for stdrng (krng)
[ 0.287917] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.287940] io scheduler noop registered
[ 0.287955] io scheduler anticipatory registered
[ 0.287972] io scheduler deadline registered
[ 0.288307] io scheduler cfq registered (default)
[ 0.288756] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.288905] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.293586] isapnp: Scanning for PnP cards...
[ 0.311634] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.368733] brd: module loaded
[ 0.377261] loop: module loaded
[ 0.377864] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.380978] Fixed MDIO Bus: probed
[ 0.381225] PPP generic driver version 2.4.2
[ 0.386722] tun: Universal TUN/TAP device driver, 1.6
[ 0.386741] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.387302] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.387471] ehci_hcd 0000:00:0f.5: guessed PCI INT D -> IRQ 10
[ 0.387701] ehci_hcd 0000:00:0f.5: sharing IRQ 10 with 0000:00:0f.4
[ 0.387859] ehci_hcd 0000:00:0f.5: setting latency timer to 64
[ 0.387902] ehci_hcd 0000:00:0f.5: EHCI Host Controller
[ 0.388109] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
[ 0.411594] ehci_hcd 0000:00:0f.5: irq 10, io mem 0xefc00000
[ 0.462643] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00
[ 0.463256] usb usb1: configuration #1 chosen from 1 choice
[ 0.463445] hub 1-0:1.0: USB hub found
[ 0.463490] hub 1-0:1.0: 4 ports detected
[ 0.463863] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.464024] ohci_hcd 0000:00:0f.4: guessed PCI INT D -> IRQ 10
[ 0.464281] ohci_hcd 0000:00:0f.4: sharing IRQ 10 with 0000:00:0f.5
[ 0.464409] ohci_hcd 0000:00:0f.4: setting latency timer to 64
[ 0.464452] ohci_hcd 0000:00:0f.4: OHCI Host Controller
[ 0.464660] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
[ 0.464730] ohci_hcd 0000:00:0f.4: irq 10, io mem 0xeff00000
[ 0.562561] usb usb2: configuration #1 chosen from 1 choice
[ 0.562754] hub 2-0:1.0: USB hub found
[ 0.562802] hub 2-0:1.0: 4 ports detected
[ 0.563107] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.563508] PNP: No PS/2 controller found. Probing ports directly.
[ 0.605297] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.635365] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.635417] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.682187] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.682377] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.682550] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.683289] mice: PS/2 mouse device common for all mice
[ 0.683920] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 0.683980] rtc0: alarms up to one day, 114 bytes nvram
[ 0.684550] device-mapper: uevent: version 1.0.3
[ 0.690117] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.690477] device-mapper: multipath: version 1.1.0 loaded
[ 0.690496] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.691267] EISA: Probing bus 0 at eisa.0
[ 0.691295] Cannot allocate resource for EISA slot 1
[ 0.691350] Cannot allocate resource for EISA slot 6
[ 0.691385] EISA: Detected 0 cards.
[ 0.694579] cpuidle: using governor ladder
[ 0.694598] cpuidle: using governor menu
[ 0.697981] TCP cubic registered
[ 0.699287] NET: Registered protocol family 10
[ 0.707761] NET: Registered protocol family 17
[ 0.707927] powernow-k8: Processor cpuid 5a2 not supported
[ 0.707949] Using IPI No-Shortcut mode
[ 0.708397] PM: Resume from disk failed.
[ 0.708456] registered taskstats version 1
[ 0.717607] Magic number: 3:668:287
[ 0.717702] tty tty20: hash matches
[ 0.717793] rtc_cmos rtc_cmos: setting system clock to 2015-02-17 16:16:14 UTC (1424189774)
[ 0.717817] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.717833] EDD information not available.
[ 0.730526] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.794990] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.056386] isapnp: No Plug & Play device found
[ 1.178764] usb 1-1: configuration #1 chosen from 1 choice
[ 1.291129] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 1.424536] usb 1-2: configuration #1 chosen from 1 choice
[ 1.427297] hub 1-2:1.0: USB hub found
[ 1.427478] hub 1-2:1.0: 4 ports detected
[ 1.718178] usb 1-2.3: new high speed USB device using ehci_hcd and address 4
[ 1.834213] usb 1-2.3: configuration #1 chosen from 1 choice
[ 3.012568] Freeing initrd memory: 13177k freed
[ 3.025259] Freeing unused kernel memory: 664k freed
[ 3.026692] Write protecting the kernel text: 4708k
[ 3.026955] Write protecting the kernel read-only data: 1848k
[ 3.132707] udev: starting version 151
[ 3.745566] pata_amd 0000:00:0f.2: version 0.4.1
[ 3.754772] scsi0 : pata_amd
[ 3.755775] scsi1 : pata_amd
[ 3.756295] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xeff0 irq 14
[ 3.756318] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xeff8 irq 15
[ 3.788629] vga16fb: initializing
[ 3.788654] vga16fb: mapped to 0xc00a0000
[ 3.789167] fb0: VGA16 VGA frame buffer device
[ 3.809688] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 3.809779] 8139cp 0000:00:0d.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 3.929943] ata1.00: CFA: CF Card, Ver2.35, max UDMA/100
[ 3.929969] ata1.00: 7880544 sectors, multi 0: LBA
[ 3.930086] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 3.937925] ata1.00: configured for UDMA/33
[ 3.938439] scsi 0:0:0:0: Direct-Access ATA CF Card Ver2 PQ: 0 ANSI: 5
[ 3.940195] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.941124] ata2: port disabled. ignoring.
[ 3.941401] sd 0:0:0:0: [sda] 7880544 512-byte logical blocks: (4.03 GB/3.75 GiB)
[ 3.941716] sd 0:0:0:0: [sda] Write Protect is off
[ 3.941739] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.941876] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.942634] sda: sda1 sda2 < sda5 >
[ 3.947781] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.006805] 8139too Fast Ethernet driver 0.9.28
[ 4.006935] 8139too 0000:00:0d.0: guessed PCI INT A -> IRQ 5
[ 4.007150] 8139too 0000:00:0d.0: sharing IRQ 5 with 0000:00:0f.3
[ 4.027835] eth0: RealTek RTL8139 at 0xdf00, 00:1a:13:b2:34:88, IRQ 5
[ 4.172852] Console: switching to colour frame buffer device 80x30
[ 5.777834] xor: measuring software checksum speed
[ 5.797623] 8regs : 393.000 MB/sec
[ 5.817623] 8regs_prefetch: 332.000 MB/sec
[ 5.837619] 32regs : 226.000 MB/sec
[ 5.857621] 32regs_prefetch: 195.000 MB/sec
[ 5.877622] pII_mmx : 856.000 MB/sec
[ 5.897621] p5_mmx : 674.000 MB/sec
[ 5.897639] xor: using function: pII_mmx (856.000 MB/sec)
[ 6.075247] device-mapper: dm-raid45: initialized v0.2594b
[ 6.273337] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 13.766396] Adding 228344k swap on /dev/sda5. Priority:-1 extents:1 across:228344k
[ 14.156008] udev: starting version 151
[ 15.399442] AMD Geode RNG detected
[ 15.413947] cs5535_gpio: base=0x6100 mask=0xb003c66 major=251
[ 16.413631] type=1505 audit(1424189790.192:2): operation="profile_load" pid=440 name="/sbin/dhclient3"
[ 16.433013] type=1505 audit(1424189790.212:3): operation="profile_load" pid=440 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 16.434090] type=1505 audit(1424189790.216:4): operation="profile_load" pid=440 name="/usr/lib/connman/scripts/dhclient-script"
[ 16.507920] type=1505 audit(1424189790.288:5): operation="profile_load" pid=447 name="/usr/sbin/ntpd"
[ 16.518175] psmouse serio3: ID: 10 00 64
[ 16.639506] cfg80211: Calling CRDA to update world regulatory domain
[ 16.748878] cfg80211: World regulatory domain updated:
[ 16.748904] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 16.748929] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.748953] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.748977] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.749001] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.749025] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.834985] Geode LX AES 0000:00:01.2: guessed PCI INT A -> IRQ 11
[ 16.835078] Geode LX AES 0000:00:01.2: sharing IRQ 11 with 0000:00:01.1
[ 16.856073] lp: driver loaded but no devices found
[ 17.370207] input: PS/2 Generic Mouse as /devices/platform/i8042/serio3/input/input2
[ 18.222524] type=1505 audit(1424189792.004:6): operation="profile_replace" pid=525 name="/sbin/dhclient3"
[ 18.314861] padlock: VIA PadLock not detected.
[ 18.322911] type=1505 audit(1424189792.104:7): operation="profile_replace" pid=525 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 18.323905] type=1505 audit(1424189792.104:8): operation="profile_replace" pid=525 name="/usr/lib/connman/scripts/dhclient-script"
[ 18.513667] type=1505 audit(1424189792.292:9): operation="profile_load" pid=532 name="/usr/lib/cups/backend/cups-pdf"
[ 18.524593] type=1505 audit(1424189792.304:10): operation="profile_load" pid=532 name="/usr/sbin/cupsd"
[ 18.618416] type=1505 audit(1424189792.400:11): operation="profile_replace" pid=538 name="/usr/sbin/ntpd"
[ 18.701615] geode-aes: GEODE AES engine enabled.
[ 19.208832] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 20.635503] cs5535audio 0000:00:0f.3: guessed PCI INT B -> IRQ 5
[ 20.635628] cs5535audio 0000:00:0f.3: sharing IRQ 5 with 0000:00:0d.0
[ 20.635864] cs5535audio 0000:00:0f.3: setting latency timer to 64
[ 20.733792] phy0: Selected rate control algorithm 'minstrel'
[ 20.772816] Registered led device: rt73usb-phy0::radio
[ 20.773380] Registered led device: rt73usb-phy0::assoc
[ 20.773767] Registered led device: rt73usb-phy0::quality
[ 20.783572] usbcore: registered new interface driver rt73usb
[ 21.145260] udev: renamed network interface wlan0 to wlan1
[ 21.168525] rt73usb 1-1:1.0: firmware: requesting rt73.bin
[ 21.317447] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 21.746263] ppdev: user-space parallel port driver
[ 29.894190] eth0: no IPv6 routers present
[ 77.233945] usb 1-1: USB disconnect, address 2
[ 5856.239343] usb 1-1: new high speed USB device using ehci_hcd and address 5
[ 5856.374292] usb 1-1: configuration #1 chosen from 1 choice
[ 6308.149967] usb 1-2.2: new high speed USB device using ehci_hcd and address 6
[ 6308.260706] usb 1-2.2: configuration #1 chosen from 1 choice
[ 6308.453951] usb 1-2.2: reset high speed USB device using ehci_hcd and address 6
[ 6308.564020] phy1: Selected rate control algorithm 'minstrel'
[ 6308.570668] zd1211rw 1-2.2:1.0: phy1
[ 6308.572068] usbcore: registered new interface driver zd1211rw
[ 6308.704908] usb 1-2.2: firmware: requesting zd1211/zd1211b_ub
[ 6308.725136] usb 1-2.2: firmware: requesting zd1211/zd1211b_uphr
[ 6308.862117] zd1211rw 1-2.2:1.0: firmware version 4725
[ 6308.902142] zd1211rw 1-2.2:1.0: zd1211b chip 0ace:1215 v4810 high 00-1a-13 UW2453_RF pa0 -7---
[ 6308.904779] cfg80211: Calling CRDA for country: US
[ 6308.928792] cfg80211: Regulatory domain changed to country: US
[ 6308.928817] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6308.928842] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 6308.928866] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 6308.928890] (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6308.928914] (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6308.928938] (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6308.928962] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 6308.953864] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6329.741180] __ratelimit: 3 callbacks suppressed
[ 6329.741206] notification-da[1362] general protection ip:dfe65f sp:bfba9760 error:0 in libglib-2.0.so.0.2400.1[dc5000+c8000]


Andrew
Сообщения: 70
Зарегистрирован: 04 апр 2014, 10:12

Re: Настройка Roverbook Neo U800

#3

Сообщение Andrew » 18 фев 2015, 00:10

sorry_one писал(а):Есть у меня такой двайс под названием Roverbook Neo U800
Первое с чем столкнулся - разрешение экрана - экран поддерживает 1024*600, а показывал максимум 800*600, при этом нижнюю часть экрана не видно и панель запуска находится за пределами экрана, перенастроил ее на верхнюю часть экрана, жить можно стало.

http://zoom.cnews.ru/goods_card/item/13 ... k-neo-u800
http://mario-zm.blogspot.ru/2009/05/rov ... 00l-2.html
http://netbk.ru/netbooks/RoverBook/Neo_ ... #tech-info

Особо не помогу, но Вы уверены что Ваш бук поддерживает 1024*600? На ссылках выше в описании бука указано разрешение 800 x 480. Если это так, то разрешение экрана у Вас стоит верное. Просто нужно сделать так, чтобы и рабочая область вписывалась в это разрешение.


Автор темы
sorry_one
Сообщения: 4
Зарегистрирован: 16 фев 2015, 20:26

Re: Настройка Roverbook Neo U800

#4

Сообщение sorry_one » 18 фев 2015, 09:30

Andrew писал(а):Особо не помогу, но Вы уверены что Ваш бук поддерживает 1024*600?

В данный момент, у меня установлено 1024*768, всерьез задался вопросом как же померить. ))))) В итоге нашел в настройках панели инструментов. Там настроечка есть, для изменения ее размеров в пикселях, в общем, максимальный размер панели получился 1024*200, по высоте больше не дает сделать, при этом панель занимает треть экрана, так что 1024*600 он может. )


Автор темы
sorry_one
Сообщения: 4
Зарегистрирован: 16 фев 2015, 20:26

Re: Настройка Roverbook Neo U800

#5

Сообщение sorry_one » 20 фев 2015, 13:37

Скурил длинный тред на английском : https://bugs.launchpad.net/ubuntu/+sour ... bug/433142

В итоге удалось настроить разрешение 800x480. 1024x600 никак не получается настроить, изображение съезжает и всё тут, видимо действительно нет поддержки этого разрешения экрана. ((( Привожу код своего /etc/X11/xorg.conf, взят из вышеуказанного треда, может кому и пригодится )))

 xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "screen1" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

#Section "ServerFlags"
# Option "AutoAddDevices" "False"
#EndSection

Section "Module"
Load "dbe"
Load "dri2"
Load "record"
Load "dri"
Load "glx"
Load "extmod"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "AutoRepeat"
Option "XkbDisable"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us,ru'
Option "XkbVariant" ",winkeys"
Option "XkbOptions" "grp:lwin_toggle,grp_led:scroll"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Generic monitor"
HorizSync 25 - 50
VertRefresh 50.0 - 75.0

Modeline "800x480" 33.45 800 840 968 1056 480 490 492 525 -hsync -vsync
Modeline "1024x600" 48.96 1024 1064 1168 1312 600 601 604 622 -hsync +vsync

#DisplaySize 177 100
#DisplaySize 255 150
Option "dpms"
EndSection

Section "Device"
Identifier "Videocard0"
VendorName "Videocard vendor"
BoardName "AMD Geode LX Video"
Driver "geode"
BusID "PCI:0:1:1"
# Specify Panel size for Geode LX, corresponds with ModeLine above:
Option "PanelMode" "33450 800 840 968 1056 480 490 492 525"
Option "PanelMode" "48960 1024 1064 1168 1312 600 601 604 622"
EndSection

Section "Screen"
Identifier "screen1"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 16
Subsection "Display"
Depth 16
Modes "800x480"
Modes "1024x600" "800x480"
Viewport 0 0
EndSubsection
EndSection


Далее буду решать вопрос с fsck, что этой заразе не нравится? Может подскажет кто куда копать?


Вернуться в «Ноутбуки, нетбуки, планшеты»

Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и 2 гостя